saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Fiche Correction - Cable Terminal for Trionic ECM|Page 148 > < Relay Box|Locations|Page 141
Page 1
background image

Engine Control Module: Technical Service Bulletins
Fiche Correction - Cable Terminal for Trionic ECM

CATEGORY 
Microfiche Discrepancy

SECTION 
14

PAGE 
41

ISSUE 
04/93-0322

CODE 
248

Subject:
Cable Terminal for Trionic ECM

Application:
M90- 9000 U.S. Edition 10, Page 2/6 Grid 2-KO6

The drawing for the Trionic connector and associated parts, positions 5, 5A and 5B, should include another cable terminal, 5C.

The cable terminal, 5A, P/N 40 61 586, is used only in 10 of the 70 pin positions of the Trionic connector. They are the larger 2.8 mm pins at the outer
ends.

Missing is the smaller, 1.6 mm terminal used in the remaining 60 pin locations. The part number is 43 54 353, and is available from spare parts, even
though it is not listed on the microfiche.

Fiche Correction - Cable Terminal for Trionic ECM|Page 148 > < Relay Box|Locations|Page 141