9000 L4-2290cc 2.3L DOHC Turbo EFI (1992)
Warranty Information:
When submitting a Recall 295 Campaign claim, the following information must be included on the claim:
Action 1: Clean with Kontakt 61 and if no corrosion on the terminal is detected, seal the contact housing.
Failure code: 10295-66-0-05-05.
Recall Action Code (RAC) = 3 must be used.
*Operation No.: 10295 for 0.6 hr.
Sublet allowance: $1.00 for Kontakt 61*
Action 2: If corrosion is detected, seal the contact housing, replace the wiring harness cable terminals and change the pressure warning switch. Clean
with Kontakt 61.
Failure Code: 10295-66-0-05-01.
Recall Action Code (RAC) = 3 must be used.
*Operation No.: 10295 for 0.6 hr.
Straight time: 0.4 hr.
Sublet allowance: $1.00 for Kontakt 61
Please update your DCS Tables as follows:
Failed Part Code: 10295
Description: Inspection of ABS pressure switch, Recall 295
Operation Number: 10295
Trans. Type: B
Engine Type: 9
Models: 9000
Hours: 6 hours
Begin year: 92
End year: 94*
After the car has been modified, mark the campaign plate in position B3 using a numeral "8" (Saab Special Tool P/N 02 97 713). Order this special tool
directly from Kent-Moore at 1-800-345-2233.
