9000 L4-2290cc 2.3L DOHC Turbo EFI (1992)
REMOVAL
1. Lift the car and remove the wheel.
2. Remove the flexible hose from the hose holder on the MacPherson strut.
3. Remove the two bolts to the steering swivel member. The mounting for the ABS cable sits in the upper bolt, that should be removed if appropriate.
4. Remove the three MacPherson strut securing screws on the upper bracket. Righthand side: on cars with A/C-ACC this is facilitated if the screws to
the cooling pipe bracket are first undone.
5. Remove the MacPherson strut.
INSTALLATION
1. Position the MacPherson strut in place in the car and tighten the three bolts on the upper bracket. The bolts should be tightened alternatively.
Tightening torque: 47 Nm (35 ft. lbs.).
