9000 L4-2290cc 2.3L DOHC Turbo EFI (1992)
Windshield Washer Reservoir: Service and Repair
To Remove
1
Unhook the wire clip to release the right-hand direction indicator lens.
2
Remove the two bolts and remove the upper bracket.
3
Unplug the connector.
4
Jack up the car and remove the right-hand front wheel.
5
Remove the lower pant of the spoiler and the front section of the wing liner on the right-hand side.
6
Remove the two reservoir retaining nuts (adjacent to the receiver on cars with A/C).
7
Disconnect the hose and unplug the connector on the top of the evaporative emission canister and lift out the reservoir complete with wiring.
To Install
Install in reverse order.