9000 Aero L4-2290cc 2.3L DOHC Turbo EFI (1996)
1. Install the pressure pipe.
-
Install the pressure accumulator after installing the hydraulic unit in the car.
-
Tighten to: 40 Nm (29.6 ft lb)
2. Fill up with brake fluid, DOT 4 specification.
3. Bleed the brake system.
4. Switch on the ignition and check that the brake and Antilock Brake System (ABS) warning lamps go out.
5. Drive the car on test and check that the brake and clutch systems are in perfect working order.
