9000 Aero L4-2290cc 2.3L DOHC Turbo EFI (1996)
9. Align the engine over its mountings and lower it into position. Remove the lifting beam.
10. Install the tie rod between the wheel arch and subframe.
11. Remove the rag from the dipstick tube and put back the dipstick. Raise the car.
12. Install the bolts in the front and rear engine mountings.
13. Install the front section of the exhaust pipe and the Lambda sensor.
14. Install the fender liner.
15. Install the wheel, tightening the bolts to 130 Nm (96 ft. lbs.).
16. Lower the car and fill up the engine oil. Run the engine up to normal temperature and check for leaks.
