9000 Aero L4-2290cc 2.3L DOHC Turbo EFI (1996)
Solar Sensor: Service and Repair
To Remove
1
Remove the A pillar trims.
2
Remove the speaker grilles and the screws securing the upper section of the facia.
3
Unhook the upper part of the facia from the cable between the A pillars.
4
Unplug the solar sensor connector and lift off the upper part of the facia.
5
Remove the solar sensor by pushing it against the facia and turning it counter clockwise, seen from the underside of the facia.
To Install
1
Press the solar sensor into the holder. Note the position.
2
Install the upper part of the facia in position and plug in the solar sensor connector.
3
Hook in the cable in the upper part of the facia.
4
Tighten the screws securing the upper part of the facia, connect the speakers and screw down the speaker grilles.