9000 Aero L4-2290cc 2.3L DOHC Turbo EFI (1996)
Ventilation Fan: Service and Repair
Tips When Fitting Fan Motor
Raise the evaporator casing.
Place the fan housing in position.
Hook the upper edge of the fan housing into the heating and ventilation unit.
Push the fan housing into position so that the securing lugs lock.
Check that the seal between the evaporator casing and fan housing is correctly positioned.
Check that the evaporator casing draining pipes are correctly positioned.
When installing the heat exchanger hose coupling, make sure that the O-rings do not remain in the heat exchanger.
Install new O-rings on the hose coupling and lubricate with synthetic vaseline.
Test pressurize the cooling system after the hose coupling has been installed and the coolant has been topped up.
Important : The fan housing is not illustrated so that it is possible to see the draining pipe.
