9000 Aero L4-2290cc 2.3L DOHC Turbo EFI (1996)
Changing the seat-belt buckle lock
1
Heat up the upset point of the seat-belt buckle lock with a soldering iron and lever apart the buckle lock.
Note the location of the seat-belt buckle lock.
2
Press in place the male part of the buckle lock on the seat-belt so the point comes out on the side that is not visible when in use
Push on the female part.
3
Press together the buckle lock with a pair of grips and at the same time melt down the point with a soldering iron.
4
Level out the melted-down point with a sharp knife.
Important : Let the plastic set properly before testing the operation.
Removal
1
Removing the seat from the car.
2
Unscrew the seat-belt lock.