saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Dampers With Automatic Level Control|Page 4160 > < Dampers With Automatic Level Control|Page 4158
Page 1
background image

Suspension Spring ( Coil / Leaf ): Service and Repair

REMOVAL

1. Lift the car and remove the wheel.
2. Remove the hand brake wire the link arm.
3. Remove the ABS cable, if necessary, by removing the clip and release the cable.
4. Position a jack under the link arm. Remove the bolt on the rear link arm bracket.
5. Slowly lower the link arm using the jack and remove the spring.

INSTALLATION

1. Position the spring with rubber cup on the link arm.

Dampers With Automatic Level Control|Page 4160 > < Dampers With Automatic Level Control|Page 4158