9000 Aero L4-2290cc 2.3L DOHC Turbo EFI (1996)
6. Check the "TCS CTRL" lamp.
-
When the lamp flashes, press the SET button on the cruise control and hold it down until the lamp goes out.
7. Engine speed should increase to 3000 RPM and then drop back to idling.
NOTE: After calibration, always check if there are any diagnostic trouble codes.
8. Test drive the car. If shifting quality is still not OK, additional adjustment must be carried out, refer to Extra Adjustment.
Extra Adjustment
NOTE: Component identifier numbers used in the following illustrations relate to specific steps in the procedures below.
NOTE: This adjustment is carried out if shifting quality is still not OK after calibration has been completed.
