9000 Aero L4-2290cc 2.3L DOHC Turbo EFI (1996)
9. Lower the car. Remove the lifting beam.
10. Install the torque arm.
11. Remove the lifting eye and install it in its place on the lefthand side.
-
Reconnect the grounding cable.
12. Connect the hose for the crankcase ventilation to the camshaft cover.
13. Lift the car.
-
Tighten the three screws to the engine mounting.
-
Tightening torque: 49-91 Nm (34.5-65.5 ft. lbs.)
14. Install the drive shaft.
15. Install the three screws in the wishbone to the ball joint.
-
Tightening torque: 26-34 Nm (19-25 ft. lbs.)
16. Install a new clamp to the rubber gaiter over the universal joint.
17. Install front right wheel.
-
Tightening torque: 120 Nm (89 ft. lbs.)
18. Connect the battery's grounding cable.
Overhaul
