9000 Aero L4-2290cc 2.3L DOHC Turbo EFI (1996)
-
Tightening torque 8.6 Nm (77 inch lbs.)
3. Assemble gear lever and selector shaft.
-
Tightening torque 20 Nm (14.8 ft. lbs.)
4. Pull back the front air duct and install it into the heater housing.
-
Install an expansion rivet.
5. Connect the front and rear air ducts and tighten the screw which holds the rear air duct.
6. Install the safety wire on cars with airbags.
-
Tightening torque 1-1.5 Nm (8-13 inch lbs.)
7. Install the gear lever console and the hand brake lead-through.
8. Reconnect the connectors on the switch panel for the window regulators.
-
Install the switch panel in the console.
9. Install the side trims.
10. Install the gear lever gaiter's mounting frame and install the gaiter.
