9000 Aero L4-2290cc 2.3L DOHC Turbo EFI HO (1997)
1. Check the level of-fluid in the reservoir and top up as necessary.
2. Connect a length of transparent plastic tubing to the bleed nipple on the rear wheel's brake caliper (either rear wheel).
-
Place the other end of the tubing in a suitable receptacle.
3. Get a helper to switch on the ignition and depress the brake pedal.
WARNING:
-
The high-pressure pump's electric motor should not be run for more than 2 minutes at a time.
-
It should then be allowed to cool down for 10 minutes.
4. Open the nipple until the brake fluid in the transparent hose is free from air bubbles.
-
To bleed the same brake circuit for the other rear wheel, repeat points 2, 3 and 4.
5. Top up with brake fluid to the MAX mark on the brake fluid reservoir.