9000 Aero L4-2290cc 2.3L DOHC Turbo EFI HO (1997)
5. Unscrew the high-pressure pump/electric motor's retaining bolt in the front mounting point.
Important: Note the order in which the damping sleeves and washer should be installed.
6. Unhook the high-pressure/electric motor from the rear mounting point.
7. Remove the pressure switch.
-
Use special tool (16) 89 96 571.
NOTE: If the pressure switch is tightened down hard, a suitable counter stay can be placed between the pump body and the hydraulic unit.
Installation
