9000 Aero L4-2290cc 2.3L DOHC Turbo EFI HO (1997)
6. Install the rubber seal for the oil strainer in the groove on the oil pan.
7. Install the oil pan, front edge first and then the back. Install the bolts loosely to start with. Tighten the bolts to 20 Nm (15 ft. lbs.), starting with
those in the middle of the oil pan.
NOTE: The longer bolt with washer which goes in the middle on the RH side.
8. Install the two rubber plugs in the back of the transmission case and return the edge of the splash plate to its original position.