9000 Aero L4-2290cc 2.3L DOHC Turbo EFI HO (1997)
Blower Motor Resistor: Service and Repair
NOTE: Models within VIN Serial No. Range: N1000001 - S1005461, inclusive refer to the "Technical Service Bulletin" No. 10950633 for information
on Fan Control/Fan Resistor modification.
Removal:
1. Remove the left-hand cover at the air intake as well as the air intake grille.
2. Unplug the fan resistor connector. Undo the clip and pull out the fan resistor.
To Install:
1. Fit a new fan resistor.
Miscellaneous during service:
-
In cars before chassis number CG1020189 the fan resistor can come loose causing the risk of short circuit or melting the cables. In later cars
the resistor attachment has been improved by fitting two clips over the edge of the attachment.
-
When servicing the can the fan resistor attachment should be checked and two clips fitted as below.
2. Remove the air intake coven 5 Fit two clips to the fan resistor 6 Refit the air intake cover. Part number for clips 73 99 207.