9000 Aero L4-2290cc 2.3L DOHC Turbo EFI HO (1997)
10
Remove the screw securing the evaporator casing. Remove the clips securing the refrigerant hoses.
11
Remove the clip and detach the temperature valve cable.
12
Unscrew and remove the torque arm.
13
Remove the nut in the rear engine mounting.
14
Install a lifting sling to the rear lifting eye and lift the engine slightly forward.
15
Carefully lift up the evaporator housing and remove the complete fan housing by undoing the securing lugs on both sides and turning it up at an
angle.
16
Remove the four plastic clips and the screw holding the fan housing together.
17
Remove the intermediate piece from the fan housing.
Split the fan housing.
18
Remove the screw securing the fan motor and press it out.
To Install
19
Installation is in reverse order.
