9000 Aero L4-2290cc 2.3L DOHC Turbo EFI HO (1997)
Fluid Filter - A/T: Service and Repair
NOTE: Component identifier numbers used in the following illustrations relate to specific steps in the procedures below.
Replacement
1. Remove the cover by undoing the 3 screws.
-
Fluid runs out.
-
Wrench size = TORX TX27, certain transmissions use a 10 mm socket.
2. Extract the fluid strainer.
-
Use pliers if necessary.
3. Install a new O-ring to the fluid strainer and insert it.
4. Install a new O-ring to the cover.
-
Apply Vaseline in the magnet recess and install the magnet in the cover.
-
Install cover (screw size = TORX TX27, certain transmissions 10 mm socket).
Tightening torque: 8 Nm (5.8 ft. lbs.)
