9000 Aero L4-2290cc 2.3L DOHC Turbo EFI HO (1997)
33
The wiring runs trom the outer part of the air duct directly up to the instrument.
34
Connect the lead to position 8 in the pictogram connector. Secure to existing wiring using cable ties.
35
Plug the spare cable assembly connector into the SRS control module.
36
Connect the spare cable assembly grounding lead to the grounding point by the SRS control module.
37
Reconnect the negative battery lead and switch on the ignition. Erase diagnostic trouble codes. Switch off the ignition and switch it back on again.
Wait for at least 10 seconds. Check to see if a diagnostic trouble code is displayed.
If a diagnostic trouble code is displayed:
Conduct appropriate fault diagnosis as described in "Diagnostics and fault finding".
If no diagnostic trouble code displayed:
Refit parts that have been removed.
