9000 Aero L4-2290cc 2.3L DOHC Turbo EFI HO (1997)
the gaiter so that its marking sits directly above the marking on the spring seat.
2. Fit the compression stop (the large hole of the compression stop should be below) and the lower spring seat.
3. Fit the spring. Pull up the rubber gaiter over the upper most coil of the spring.
4. Fit the upper spring seat with this recess in the centre of the rubber gaiter marking. Check that the marking is in line with the steering swivel
member bracket.
5. Use tool 89 96 613 to fit the upper bearing and tighten the nut.
6. Remove the spring press. Ensure that the spring is sitting correctly and check that the marks are in line.
