9000 Aero L4-2290cc 2.3L DOHC Turbo EFI HO (1997)
3. Remove the upper part of the valve body, four screws.
4. Slide the separator plate off the side of the valve body.
-
Do not lift.
CAUTION:
^
The separator plate must be pushed off from the side of the valve body.
^
It must not be lifted. if the separator plate is lifted up, parts in the valve body may also be lifted.
5. Remove the two plastic balls for valve shift pressure 1-2 and 2-3.
a. Ball, valve throttle pressure shifting 1-2, diameter: 4.5 mm.
b. Ball, valve throttle pressure shifting 2-3, diameter: 4.5 mm.
6. Grip the valve body and turn it upside down.