9000 Aero L4-2290cc 2.3L DOHC Turbo EFI HO (1997)
-
Lightly do up the screw.
Middle Section
NOTE: Component identifier numbers used in the following illustrations relate to specific steps in the procedures below.
1. Install the modulator valve and attach it using the clip.
2. On models with turbocharger, install the O-ring to the shift sequencing valve in the valve body.
3. On all models, place the middle section of the valve body on the workbench and press in all valves and springs
4. Install the gasket to the cover.
5. Pushing against the bench, press together the cover and the valve body middle section while adjusting springs and valves so that they are correctly
positioned.
6. Install and tighten the cover screws.
-
Tightening torque: 6 Nm (4 ft. lbs.)
