9000 Aero L4-2290cc 2.3L DOHC Turbo EFI HO (1997)
7. Install the small spring to the time control valve.
-
Press in the valve and secure it with the clip.
-
The clip should be oriented as illustrated.
8. Install the valve for clutch C'.
-
Lock using the clip.
-
The clip should be oriented as illustrated.
9. Install the valve for clutch E.
-
Lock using the clip.
-
The clip should be oriented as illustrated.
10. Place the middle section of the valve body on the workbench and push in all washers, valves and springs.
11. Pushing against the bench, press together the cover and the valve body middle section while adjusting springs and valves so that they are correctly
positioned.
12. Install the bracket and tighten the cover screws.
-
Tightening torque: 6 Nm (4 ft. lbs.)
Upper Section
NOTE: Component identifier numbers used in the following illustrations relate to specific steps in the procedures below.
