saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Pictogram-Filament Monitor|Page 5964 > < Diagram Information and Instructions|Page 5961
Page 1
background image

Driver/Vehicle Information Display: Description and Operation
Pictogram-Filament Monitor

Certain parts of the car's lighting system are monitored by two filament monitors 228A and B and pictogram 213.

The five lamps F, G, D, E and J in the pictogram are covered individually in, the Pictogram-Door Indication.

Filament Monitor
Filament monitor 228B monitors full and dipped beams and filament monitor 228A monitors rear lights and brake lights.

Filament monitor 228B incorporates relays which act on the pictogram and light lamp C if there is a fault while filament monitor 228A
incorporates shunt resistors which act on the pictogram and light lamp B if there is a fault.

The lamp in the centre, A (central warning lamp), lights up the car's outline on the pictogram and always comes on when a fault is detected.

When ignition switch 20 is in the Drive position, current is supplied to pictogram terminal 5.

Front Filament Monitor
If there is a fault in any lighting circuit, an imbalance arises and the relay is activated. Terminal C2 in the filament monitor and lamps C and A
(central warning lamp) in the pictogram are grounded and the lamps light up.

Rear Filament Monitor
The filament monitor senses if the current to one of the lamps is incorrect. Terminal Olin the filament monitor and lamps B and A (central warning
lamp) in the pictogram are grounded and the lamps light up.

In certain markets, the filament monitor incorporates a circuit for monitoring brake light switch 29. See Brakes Lights With/Without Reset
Memory.

For high-level brake lights, there is a special monitoring function for brake light 109, see Brake Lights and High-level Brake Light.

Oil Pressure Warning Lamp 47D
The oil pressure warning lamp shows the driver if the engine oil pressure becomes too low.

If the engine oil pressure drops below 0.3-0.5 bar, the engine oil pressure sensor closes and lamp 47D lights up.

The pictogram central warning lamp is also grounded and the pictogram lights up.

Airbag Warning Lamp 47T
The airbag warning lamp shows the driver if there is a fault in the airbag system, see Airbag.

Pictogram-Filament Monitor|Page 5964 > < Diagram Information and Instructions|Page 5961