saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Trim Panel|Description and Operation|Page 6392 > < Trim Panel|Description and Operation|Page 6390
Page 3
background image

13

Remove the center facia air vent.
Heating and ventilation system and A/C:
Remove the center facia air vent by unfastening the control panel. Depress the four locking hooks on the control panel and pull the panel towards
the towards the interior.
Unfasten the rod on the air distribution damper, the gear for the temperature control damper and all the connectors.
ACC:
Pull out the climate control module and unfasten the facia air vent. Pull the connectors apart.

14

Lift away the panel.

15

Disassemble the steering wheel.

16

Disassemble the dip switch unit. Mark the connectors to facilitate reinstallation.

17

Remove the screws securing the combined instrument.

18

Unfasten the side carpeting on the center console. Remove the acoustic insulation below the facia.

19

Remove the screws securing the facia. 

20

Lift out the facia.

Trim Panel|Description and Operation|Page 6392 > < Trim Panel|Description and Operation|Page 6390