9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
Air Door Cable: Service and Repair
1. Fully lower the glove compartment flap by bending out the link arms so that the stops are released. Full down the glove compartment light.
2. Remove the glove compartment together with the facia vent by undoing the six screws. Using a screwdriver, carefully pry along the edge of the
facia vent. Note position of clip. Unplug cables to glove compartment fight and light switch.
NOTE: Cars equipped with passenger airbag: Remove the upper part of the facia.
3. Remove door trim seals from A pillars and remove A pillar trim.
4. Remove loudspeaker grilles. Remove screws from the top of the facia. Remove the top of the facia by lifting up its front edge and pulling it into
the cab so that the clips come loose.
5. Undo the screws and pull the electrical distribution box down.
6. Remove the air ducts to the outer facia vent and defroster. Unscrew the windscreen defroster.
7. Remove the ashtray. Pull the ashtray holder forward by bending down the two upper securing lugs.