9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
Hazard Warning Switch: Service and Repair
To Remove
1
Activate the button to set it in its outermost position.
2
Pry out the switch by means of two screwdrivers inserted in the special slots on either side of the switch.
3
When changing the switch: unplug the connector.
4
When changing the bulb: use a screwdriver to remove the bulb holder and bulb.
To Install
Note the locating grooves in the panel opening. In other respects, install in reverse order.