9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
The control module remains active for a certain period of time after the ignition switch has been turned to the OFF position. If the engine is
restarted during this period no pre-injection will take place when the starter motor begins to turn the engine over.
Manual/Automatic
The electronic control module has the same part number for cars with a manual gearbox as for those with automatic transmission.
When a gear position other than P or N is selected on cars with automatic transmission, positive battery voltage will be applied to pin 42 and the
idle air control valve will open a little more to compensate for the increase in load.
Pin 42 is not connected on cars with a manual gearbox.