9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
Variable Induction Control Actuator: Service and Repair
Vacuum Valve (Inner Flap)
To Remove
1. Remove the engine covers.
2. Disconnect the vacuum hose.
3. Release the control arm from the flap.
4. Remove the two valve retaining screws.
5. Remove the valve.
To Fit
Fit in reverse order.
Checking The Vacuum Valve
1. Remove the engine covers.
2. Disconnect the vacuum hose from the vacuum valve.
3. Connect a pressure/vacuum pump.
4. Generate a vacuum. The valve should now be activated.
To Fit
Fit in reverse order.