9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
4
Connect the throttle cable.
Adjust the throttle cable so that there is a small amount of slack in it. Watch the control arm and turn the adjusting mechanism.
When the throttle cable is in resting position, the control arm should also be in its resting position.
5
On the front of the control bracket (underneath) is an adjusting screw which should be adjusted so that the stop lug on the throttle body is no more
that 0.3 mm from its end position when the control arm is in wide open throttle position. Check clearance using a feeler gauge.
6
Remove the tool.
The cruise control cable has no adjusting mechanism.