9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
Windshield Washer Motor: Service and Repair
Right-Hand Drive
To Remove
1
On RHD cars the windscreen wiper should be started and the ignition switched off when the wipers are in a vertical position.
2
Remove the bonnet seal and cover panel (8 screws) and separate the washer hose.
3
Disconnect the negative battery cable.
4
If the car is equipped with anti-lock brakes (ABS), release the electronic unit from the bracket and withdraw it.
5
Use a screwdriver to prise loose the linking arms.
6
Unplug the wiper motor connector.
7
Remove the motor (3 bolts) and withdraw it.
To Install
Install in reverse order.
Tightening torque, wiper arms: 14 - 22 Nm (10 - 16 lbf ft)