9000 CDE V6-2962cc 3.0L DOHC (B308) (1995)
Wiper Switch: Service and Repair
To Remove
1
Disconnect the negative battery cable.
Important :
Do not disconnect the battery cable while the engine is running as this could seriously damage the generator (alternator).
2
Pull out the steering wheel as far as it will go.
3
Remove the steering column bearing bracket cowls (4 screws).
4
Unplug the connector.
5
Undo the wiper stalk switch screws.
6
Withdraw the wiper stalk switch.
To Install
Install in reverse order.