saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Security Lamp/Indicator > < Keyless Transmitter - Rubber Button As Spare Part|Page 5119
Page 3
background image

4

Fit the new rubber button. Make sure the button symbols are in the correct positions.

Poke down the rubber with a small screwdriver. Check the front of the remote control to make sure it is correctly fined.

5

Put together the two halves.

Important

Take great care of the circuit board when fitting together the two halves.

6

Put back the batteries and close the cover.

Important

Be careful not to touch the contact surfaces on the batteries as this may cause interruptions in operation.

7

Synchronize the remote control to the car by pressing the left-hand button five times.

Warranty/Time Information

Failed Object: 38350

Fault/Reason code: 33

Location code (US): 9

Warranty type (US): 01

Repair/Action code: O5

Labor Operation (US): 38350

Straight time: 0.2 hours

(CA: B4270 0.2 hrs.)

Security Lamp/Indicator > < Keyless Transmitter - Rubber Button As Spare Part|Page 5119