9000 CS L4-2290cc 2.3L DOHC Turbo EFI (1996)
NOTE: The fan housing is not illustrated so that it is possible to see the draining pipe.
To Install:
The installation is in reverse order of removal.
See: Front Fan Motor Removal
Tips When Fitting Front Fan Motor:
^
Raise the evaporator casing. Place the fan housing in position. Hook the upper edge of the fan housing into the heating and ventilation unit. Push
the fan housing into position so that the securing lugs lock.
^
Check that the seal between the evaporator casing and fan housing is correctly positioned. Check that the evaporator casing draining pipes are
correctly positioned.
^
When fitting the heat exchanger hose coupling, make sure that the 0-rings do not remain in the heat exchanger Fit new 0-rings on the hose
coupling and lubricate with synthetic vaseline.
^
Test pressurize the cooling system after the hose coupling has been fitted and the coolant has been topped up.
Rear Fan Motor, Changing
