9000 CS L4-2290cc 2.3L DOHC Turbo EFI (1996)
Removal
1
Unfasten the cover for the backrest adjustment wheel, remove the screw and take oft the wheel.
2
Remove the cover and screw off the seat side panel.
3
Unfasten the seat belt screws from the seat.
4
Remove the B pillar trim.
5
Remove the screws and take away the seat belt inertia reel.
6
Thread the strap guide and end piece through the pillar trim.
Installation
Installation is performed in reverse order
Important : The cover strip for the height adjustment as two holes. Install the screw for the seat belt strap guide through the round hole.