9000 CS L4-2290cc 2.3L DOHC Turbo EFI (1996)
10. Knock off the end cap.
11. Remove the locknut. Use an adjustable spanner on the flats to hold the pinion shaft.
12. Remove the dust cap circlip at the upper end of the valve.
13. Press out the servo valve together with the seals and bearings. Use special tool Nos. 83 91 849 and ring No. 87 904 as a counter grip.
14. Withdraw the rack.
15. Remove the outer hydraulic seal retainer (1) and the bush (2).
16. Remove the inner hydraulic seal. Use special tool 89 96 399 and a long drift.
17. Remove the circlip from the valve body.
18. Tap out the lower pinion bearing.
19. Tap out the bush and seal using a drift.
