9000 CS L4-2290cc 2.3L DOHC Turbo EFI (1996)
Installation
1. Install the gear selector cable with rubber grommet.
2. Install the selector cable to the selector cable bracket.
3. Lightly lubricate the selector arm ball and install the selector cable to the transmission.
-
Rubber mounted selector cable. is attached with clips.
-
Tightening torque, rubber grommet: 7-9 Nm.
NOTE:
^
Do not lubricate the selector cable cup.
^
If there is grease in the cup, the ball may become detached.
4. Install the gear indicator cover and indicator lamp.
5. Install selector lever covers and release buttons.
6. Install the storage pocket.
7. Install the air duct.
8. Install lefthand and righthand side trim.
9. Install the battery tray.
10. Install battery and leads.
11. Adjust the selector cable
