9000 CS L4-2290cc 2.3L DOHC Turbo EFI (1996)
40. Install the oil drain plug and seal with thread sealing liquid.
-
Tighten to: 45-55 Nm (33-41 ft. lbs.).
-
Check that the magnet is in place in the plug.
41. Oil should not be poured in until after the drive shafts have been installed on the gearbox and the gearbox installed into the car.
-
Amount of oil (dry) 1.9 liters.
42. Reconnect the reverse light switch with a new seal after the gearbox has been installed into the car.
-
Tightening torque: 20-28 Nm (15-21 ft. lbs.)
43. Install the speedometer drive.
