saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 6040 > < Diagram Information and Instructions|Page 6038
Page 11
background image

Radio Installation Pre-wiring: Component Location

COMPONENT LOCATION VIEW

Radio Installation Pre-wiring: Component ID

COMPONENT ID

16

Rheostat (lighting for controls), on the dashboard between the steering wheel and driver's door.

20

Ignition switch, on the right-hand side of the steering column.

22A

Fuse board behind the cover flap in the glove box.

230

Distribution terminal (+30 circuit) in main fuse box behind the glove box.

266

Loudspeaker sockets, two in the dashboard, two in the parcel shelf. 

267

2-pin and 8-pin connectors for radio connection, in the centre 

(H2-81)

console.

(H8-8)
(H8-9) 

2-Pin Connector

H2-42

Beside the prepared location for the motorized aerial, on the left- hand side at the rear.

10-Pin Connector

H10-14

In the luggage compartment on the left-hand side beside the filament monitor.

Grounding  Points

G8

Grounding point, dashboard, by the left-hand front loudspeaker socket.

DESCRIPTION OF OPERATION

Cars which are not equipped with a factory-fitted audio system are pre-wired for radio installation by means of two 8-pin connectors, one for
power supply, etc. and one for the connection of loudspeakers. Cars for the EU market are also fitted with a 2-pin connector, H2-81, providing the

Diagram Information and Instructions|Page 6040 > < Diagram Information and Instructions|Page 6038