9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Unit
WARNING
-
When carrying out any work on the brake system's hydraulic circuits the system must first be depressurized.
-
Depress the brake pedal about 20 times or until noticeable resistance is felt in the pedal.
-
Before starting any work on the pressure accumulator, thoroughly clean the area adjacent to it so that the risk of dirt getting into the
brake system is eliminated.
Removal
1. Disconnect the battery cables and lift out the battery.
2. Remove the fuel filter from the battery tray.
3. Move the fuel filter aside.
4. Remove the pressure accumulator.
-
Use an 8 mm Allen key.
Installation
