9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
Parking Brake Cable: Service and Repair
Removal
1. Remove the front passenger seat.
2. Remove the brush seal from the handbrake lever console.
3. Remove the locking plate from the adjusting nuts.
4. Remove the rear section of the centre console by undoing the two screws at the rear and one on each side at the front.
-
Remove the ring and slide the gaiter over the gear lever.
-
Remove the selector lever on cars with automatic transmission.
5. Unplug the connector from the control panel for the electric window lifts.
6. Remove the sill scuff plates and fold back the carpet.
7. Remove the three screws securing the cover panel over the cables.
8. Remove the plastic clip.
9. Unscrew the adjusting nuts from the ends of the cables at the handbrake lever.