saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 1588 > < Diagram Information and Instructions|Page 1586
Page 19
background image

Diagnostics And Data Link Connectors

To facilitate the testing of the car's different electronic systems, there are a number of special scan tool diagnostics and data link connectors built-in.
These connectors have the following part numbers

Number

For System

348

Data link connector under right-hand seat

444

Saab Trionic data link connector. Small round black connector beside the Trionic control module (for production only)

General Information

General Information About Fuses
The car's +12 V power supply is fed to the various consumer units via three main fuse boxes, one behind the glovebox, one in the engine bay by
the left-hand headlamp and one for the ABS brakes in the engine bay on the bulkhead partition. Most of the fuses and relays are located in the
main fuse boxes.

The fuses are of blade type and, together with their connecting sockets, give rise to a lower voltage drop than earlier types. They are also more
resistant to corrosion.

Blade fuse colour coding:

Fuse

Colour

5 Amps

Light brown

7.5 Amps

Dark brown

10 Amps

Red

15 Amps

Blue

20 Amps

Yellow

25 Amps

Transparent

30 Amps

Green

Checking Blade Fuse

Checking blade fuses
Each blade fuse has test sockets which can be used to check that the fuse is intact without the need to remove it. If both sockets are live, the fuse is
intact.

Diagram Information and Instructions|Page 1588 > < Diagram Information and Instructions|Page 1586