9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
1. Switch on the ignition.
2. Select "LO" on the ACC control module.
3. Switch off the ignition.
4. Remove the cover over the bulkhead.
5. Detach the cable from the damaged part of the lever (A).
6. Fit the steel lever (D).
7. Secure the steel lever by pressing in locking lug E.
8. Refit the cable and press on the clip.
9. Refit the cover over the bulkhead.
10. Remove the ACC control module from the facia.
11. Fit rubber bushing part number 43 82 826 to the lever's rear end position stop (B).
12. Place the ACC control module in position in the facia.
13. Calibrate the ACC control module by switching on the ignition and then pressing "AUTO" and "VENT" at the same time.
