9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
6
Remove the rotor section.
7
Compressor SD 510:
Remove the three screws securing the coil to the compressor.
Compressor SD 709:
Remove the circlip securing the coil to the compressor.
8
Remove the screw and clip holding the cable.
9
Lift off the coil.
Installation
1
Install shims to adjust clutch play.
The same number of shims should be reinstalled.
2
Install the coil.
Important : The guide in the coil should be inserted in the hole in the compressor housing.
