9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
Control Assembly: Service and Repair
Changing the Bulb In the AC Switch Panel
To Remove
1
Unplug the Automatic Climate Control (ACC) control module.
2
Undo the six screws securing the rear part to the facia.
Undo the snap fasteners using a screwdriver.
3
Change the defective lamp.
To Install
4
Install the plastic cover so that the cable ribbon between the control module and the panel cannot be damaged.
5
Screw the panel to the control module.
6
Secure the ACC control module in the car's facia.
7
Calibrate the ACC system by pressing the "AUTO" and "VENT" buttons at the same time.
Important : During calibration, all earlier diagnostic trouble codes are erased. Before carrying out calibration, all stored diagnostic trouble codes
should be read.