9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
seen as the pressure drops below 3 bar on the gauge beside the blue low-pressure hose on the pressure gauges).
10. Open the cock on the blue low-pressure hose on the pressure gauge stand when the compressor starts working so that the remaining amount of
refrigerant is sucked into the compressor.
11. Close the cock to the blue low-pressure hose on the pressure gauges when the bottle with refrigerant is emptied.
12. Close the valve on the blue low-pressure hose snap-on coupling on the compressor by unscrewing the knob.
13. Remove the blue low-pressure hose snap-on coupling from the compressor and refit the protective plug over the service valve.
14. Close the cock on the refrigerant bottle.
15. Remove the yellow hose from the refrigerant bottle.
