9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
On the other hand, if it shows low resistance or none at all, this indicates that the cable is short-circuited to ground.
Checking For Open-Circuit
Checking For Open-circuit
Use an ohmmeter or Intelligent Saab Tester Scan Tool set for resistance measurement.
1. Adjust the ohmmeter until a reading of 0 Ohms is obtained when its leads are held in contact with each other.
2. Disconnect the power supply.
3. Connect the leads to each end of the wiring harness or component that is to be checked.
4. If the ohmmeter shows a resistance < 1 Ohm, there is no open circuit.
