9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
when the current is turned off.
To obtain optimal combustion and consequently cleaner exhaust emissions, the injectors are provided with 4 holes to ensure good distribution of
the fuel.
The fuel jets are set with a high degree of accuracy (two jets for each inlet valve). This calls for extreme precision in the mounting of the injectors
and to ensure their exact positioning they are fixed in pairs in special mounting brackets between cylinders 1, 2 and cylinders 3, 4
The injectors are supplied with current from the main relay and the control module grounds them as follows:
-
Injector 1 is connected to ground via pin 3
-
Injector 2 is connected to ground via pin 4
-
Injector 3 is connected to ground via pin 5
-
Injector 4 is connected to ground via pin 6
