9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
Assembly
1. Press the tapered roller bearings onto the pinion shaft gear wheel.
-
Use installing sleeve tool No. 87 92 202, or equivalent, and a press.
2. Press the tapered roller bearings onto the pinion shaft.
-
Use installing ring tool No. 87 90 982, or equivalent, in a press.
3. Install both the pinion shaft bearing races and drive them in using a plastic hammer.
-
It may be necessary to heat the gear case.
4. Install the pinion shaft in the transmission and adjust pinion preload